Most concrete floors have joints and each joint comprises of two slab edges, otherwise known as Joint Arrisses.
Floor Joints are designed and positioned to allow movement in concrete floors, without restraining that movement as that could lead to random cracking. The joints should be filled with a joint sealant that is rigid enough to provide support and protection to the concrete arrisses but it must also accommodate the anticipated movement in the floor whilst remaining bonded to at least one face of the joint.
Are you having problems with floor joints? Is it slowing down production?
See how CG Flooring System’s concrete joint repairs can get you back up and running without shutting down your entire operation.
The size and cost of floor concrete joint repairs can be kept to a minimum if the damage is detected and repaired at an early stage. A proactive approach with regular inspections should be adopted to check that the existing joint sealant is doing its job to protect and maintain the floor joint arrisses. Once the damage has been allowed to progress beyond the scope of re-sealing the joint, it will be necessary to re-construct the joint arris edges.
Hard wheels and heavy impact loads from materials handling equipment cause major damage to the joint arrisses.
Wide joints suffer the most damage and any difference in level between the floor slabs will exaggerate the problem.
New extremely durable joint system provides a smooth surface on which warehouse traffic can pass, potentially reducing maintenance costs to Materials Handling Equipment.
Saw cuts around the damaged area ensure that CoGri Repair Mortar is not ‘feather-edged’.
CoGri Repair Mortar replaces the damaged arrisses of the concrete slabs to a depth of at least 35mm.
The repair is ground smooth to create an impact free transition for wheeled traffic.
Wide joints increase the risk of arris spalling due to the deflection of the joint sealant under load. It is therefore important to reduce the width of the joint opening at surface level. Our tried and tested floor Joint Arris Repair solution allows a ‘traditional expansion joint at 50mm wide’ to be replaced with a neat 5mm wide, fully sealed saw cut joint. All of our joint repair details are ground smooth and flush with the adjacent floor surface to ensure wheeled traffic have a smooth transition over the repaired joint.
CoGri Middle East’ heavy duty repair mortar, CoGri Rapid Mender is specifically intended for use on concrete industrial floors to repair joint arris damage quickly and with minimum disruption to the ongoing operation.
The rapid curing nature of the repair material enables completed repairs to be opened up to traffic within 30 minutes. Significantly reducing the downtime on operations.
Repairing badly damaged floor joints can improve operational efficiency, as well as reducing maintenance costs.
Good floor joint details will help:
Please contact us if you have any questions about our flooring services.